Nordic Bath

← Back to overview

Please read these instructions before your first use — it takes 2 minutes and makes all the difference!

Safety — check before anything else

⚡ Check that the pump is running before lighting the fire. It circulates the water and runs automatically from noon to midnight. Red dot only = pump on standby (press the power button twice to restart it). A number displayed = pump running, nothing to do. Screen off = check the physical switch in the technical shed.

🔥 The stove and tub get very hot: never touch the stove wall or pipes with bare hands, keep children at a distance and supervise them at all times.

🌡️ Check the temperature before entering: ideally between 36°C and 40°C. Pregnant women and people with heart conditions: consult your doctor before use.

🕚 Use until 11:00 p.m. maximum, to preserve the neighbourhood’s peace and quiet.

🚫 The water inlet/outlet valves must stay open — never touch them. The water must always fully cover the internal nozzles.

🍷 Please drink responsibly in and around the bath.

Nordic bath pump

Hygiene

Shower required before AND after use, with no soap, shampoo or oil in the water. Foot bath required before entering. A net is available to remove debris (leaves, dust) if needed. A chlorine tablet dispenser keeps the water clean at all times — do not remove it. Water quality is checked regularly and fully renewed every 4 to 6 weeks. Guests allergic to chlorine are advised not to use the bath.

Hygiene

Supplies

At the back of the structure: dry kindling, firelighting paper, firelighters and a complete starter kit (including a refractory log — do not burn it first). Extra logs are stored in the compartment next to the bath.

Lighting the fire, step by step

1. Prepare the firebox — crumple paper at the bottom of the stove, add firelighters and kindling on top.
2. Light it — use a lighter, let the fire take hold before adding anything else.
3. Add logs — once you have good embers, add logs gradually (above and below the grate).
4. Keep the fire going — come back every 25 minutes to add wood and check the temperature; put the lid back on to speed up the heating.

Expect roughly +6°C per hour, i.e. 2 to 2.5 hours to reach 36-40°C (varies by season). The bath becomes pleasant from 32°C — stop feeding the fire once it reaches 36°C.

Lighting the fire

After use

Remove debris with the net and empty it · empty the tub using the bucket provided · put the lid back on properly · let the fire go out naturally (never put it out with water) · empty the COLD ashes only, using the ash shovel, onto the pile at the bottom of the garden · shower after use.

Ash cleanup after use